欧美进口 全新库存 DI840 3BSE020836R1 模块 ABB瑞士

联系人: 刘锦玉

电话/微信：15359273791

邮箱：3005391986@qq.com

企业QQ: 3005391986/3005393110

主营产品，备件供应，充足库存

Foxboro（福克斯波罗）：I/A Series系统，FBM全系列（现场输入/输出模块）

顺序控制、梯形逻辑控制、事故追忆处理、数模转换、输入/输出信号处理、

数据通信及处理等。

Westinghouse（西屋）：1C31系列DCS系统、CPU、OVATION系统、WDPF系统、

WEStation系统备件。

Triconex（英维思）:冗余容错控制系统、基于三重模件冗余（TMR）结构的现代化的容错控制器。

EMERSON（艾默生）:模块、卡件、驱动器等各类备件。

2. Common fault handling of IPC in broadcast transmitter

2.1 COM port communication is not normal

Fault phenomenon: when communicating with other COM port equipment RS-485, it can not be sent or received, or it can not be sent, etc.

Fault analysis: Usually, when programming COM communication, it is necessary to judge the communication state of COM port in advance. Make sure that you can send data when it&＃39;s valid and receive data when it&＃39;s valid. This is called RTS communication. However, in order to facilitate programming and speed up program execution, some users did not confirm the COM port communication state before designing the hardware, and did not pay attention to the query transceiver state during programming, which is also called AUTO communication mode. Considering its versatility, usually the motherboard with COM port is RTS communication, so when used for RS-485 communication, there will be a can send can not receive or can not receive the fault phenomenon;

Solution: The simplest solution to this problem is to use the EVOC product Ark-14520 (RS232 to RS485 module). However, if it is the communication between the COM port on the motherboard, usually there will be no such problem.

2.2 LCD display is not bright

Fault phenomenon: when the case on power, LCD display without any response;

Failure analysis: the direct cause of this failure is that the LCD backlight is not lit. After the maintenance personnel used a multimeter to measure the input power supply voltage of the backlight drive panel inverter, they found that +12V was not input. When the input power supply of the backlight drive panel was cut off, the voltage was normal. It is judged that the fault is caused by short circuit of +12V power supply on the backlight drive plate.

Solution: remove the backlight drive plate with short circuit problem from the chassis, and then power it on, so that the problem can be effectively solved. If necessary, some protective measures should be taken for the backlight drive panel to avoid such problems again.

ABB是全球技术领导企业，致力于推动社会与行业转型，实现更高效、可持续的未来。

ABB 通过软件将智能技术集成到电气、机器人、自动化、运动控制产品及解决方案，不断拓展技术疆界，提升绩效至新高度。离散自动化与运动控制部：离散自动化与运动控制部提供帮助客户提高生产效率和能源效率的产品、解决方案和相关服务，其电机、发电机、传动系统、可编程逻辑控制器、电力电子和机器人产品可以广泛应用于电力、运动和控制等自动化领域。该业务部门在风力发电机行业拥有领导地位，在太阳能领域的产品线也日益丰富，这将进一步促进离散自动化与运动控制部在工业领域现有技术、渠道和运营平台的发展。

ABB机器人提供了丰富I/O通信接口,可以轻松的实现与周边设备进行通信表。
关于ABB机器人I/O通信接口的说明
1、ABB标准I/O板提供的常用信号处理有数字输入di、数字输出do、模拟输入ai、模拟输出AO,以及输送链跟踪。
2、ABB机器人可以选配标准ABB的PLC，省去了原来与外部PLC进行通信设置的麻烦，并且在机器人的示教器上能实现与PLC相关的操作。