GE IS200VVIBH1C GE 用作振动监测卡

Description

产品描述

IS200VVIBH1C是GE为Mark VI系统制造的电路板组件。Mark VI 是 GE 在 60 年代、70 年代、80 年代和 90 年代以 Speedtronic 名称发布的蒸汽和燃气轮机管理系统之一。作为该系列中zui后发布的系统之一，Mark VI也是zui先进的系统之一。它采用TMR（三重冗余模块化）架构构建，并具有在Windows平台上运行的基于PC的HMI（人机界面）。这款 HMI PC 包括专为涡轮机管理而设计的软件，包括完全可编程的维护工具。

该IS200VVIBH1C用作振动监测卡，可处理来自连接到 DVIB 或 TVIB 端子板的多达 6421 个探头的振动探头信号。这些用于测量差胀、转子偏心率、振动或转子轴向位置。有关探头功能和设置的更多信息，请参见 Mark VI 涡轮机控制系统指南 （GEH-<>）。

该IS200VVIBH1C有一个单插槽面板，连接到组件密集的电路板上。面板只有三个组件，它们都位于覆盖物的zui顶部;这些是标记为运行/失败/状态的 LED 指示灯。

IS200VVIBH1C的表面包括两个背板连接器，分别位于电路板的后边缘（P1 和 P2）。该板还有其他四个连接器，设计有导电走线和点。电路板表面有电阻器、二极管、电容器和电感线圈/磁珠。其中一些组件也出现在电路板的背面。位于IS200VVIBH1C上的集成电路包括FPGA、RAM和SRAM芯片。安装程序可以在上述 GE 出版物中找到。

Product description

The IS200VVIBH1C is a circuit board component manufactured by GE for the Mark VI system. The Mark VI was one of the steam and gas turbine management systems released by GE under the name Speedtronic in the 60s, 70s, 80s and 90s. As one of the last systems to be released in the series, Mark VI is also one of the most advanced. It is built with a TMR (Triple Redundant Modularity) architecture and has a PC-based HMI (Human Machine interface) that runs on the Windows platform. This HMI PC includes software specifically designed for turbine management, including fully programmable maintenance tools.

The IS200VVIBH1C is used as a vibration monitoring card to process vibration probe signals from up to 6421 probes connected to DVIB or TVIB terminal boards. These are used to measure differential expansion, rotor eccentricity, vibration, or rotor axial position. For more information on probe functions and Settings, see the Mark VI Turbine Control Systems Guide (GEH-<>).

The IS200VVIBH1C has a single-slot panel that connects to a component-dense circuit board. The panel has only three components, all of which are located at the very top of the cover; These are LED indicators labeled Run/Fail/Status.

The surface of the IS200VVIBH1C consists of two backplane connectors located on the back edge of the board (P1 and P2). The board also has four other connectors designed to conduct wires and points. The surface of the board has resistors, diodes, capacitors and inductors/beads. Some of these components also appear on the back of the circuit board. Integrated circuits located on the IS200VVIBH1C include FPGA, RAM and SRAM chips. The installer can be found in the above GE publication.

EMERSON PR9268/202-100

ABB XO08R2 1SBP260109R1001

TRICONEX 3503E

GE IC695CRU320

WOODWARD 9907-164

GE VMIVME-7750 

GE 469-P5-HI-A20

NI SBRIO-9607

LAM 810-800082-043

GE IS215VCMIH2C

SST 5136-PFB-PCI 

BENTLY 3500/40M 140734-01

BENTLY 3500/32 125712-01

BENTLY 3500/92 136180-01

BENTLY 3500/25 149369-01

BENTLY 3500/15 127610-01

BENTLY 3500/05-01-02-00-00-01